Metal Ball Jointed Gear Rods

[TaylorsTDGTI 0]

I would like a full set of these if you have one available....

 

Will PM you.

 

James

[Miles 331 1 Cars]

Excellent cheer's, I'll send the sample rod off on Monday to get the ball rolling

[osama 0]

if it will mean i wont have a sloppy gearstick on my 1.9gti i could be on taking a set! how much are the standard ones?

[bren_1.3 1]

if it will mean i wont have a sloppy gearstick on my 1.9gti i could be on taking a set! how much are the standard ones?

 

this rod is for the TU engined cars. the longest rod has a bend in it that clears the steering rack.

 

miles sells sets of these rods for XU engines. which is what you have, with your 1.9...this "group buy" is not for you.

[osama 0]

this rod is for the TU engined cars. the longest rod has a bend in it that clears the steering rack.

 

miles sells sets of these rods for XU engines. which is what you have, with your 1.9...this "group buy" is not for you.

 

thanks man! i was looking on the net for the same ones so lucky you caught me!

again, thanks

[bren_1.3 1]

they can be found on ebay, there "might" be a link to miles' ebay shop in his signature or profile.

[bren_1.3 1]

any update on these?

[Miles 331 1 Cars]

Sample rod has been sent off, so I should hear something back soon, Expect the rod to take around 3 weeks for delivery as I have a large order of other parts due at the same time

[Miles 331 1 Cars]

Just to keep everyone upto speed on this, I have sent payment off to get the rods made up so they should be another couple of weeks

[bren_1.3 1]

whoooooooooop!

[Miles 331 1 Cars]

Another quick update, The rods should be here next week so I'll add a new post when they arrive

[joe1joe 3]

are you still going to sell them?

[Miles 331 1 Cars]

I have had a batch of 5 made up as the demand is very low on these, If I can get another 5 orders then no more will be made

[DaveW 6]

woohoo

[joe1joe 3]

well i want a full set, so is anyone else up for some? i have noticed u have 2 of them in your shop, i take it that all u have left.

[Miles 331 1 Cars]

The short ones I will always stock as the lengths are used over over models so easy to keep in stock, The long rod is being machined out of a single bar then plated and bent as the std rod is hense that one is only available in limited numbers

[Jrod 7]

As said I'm down for 2 of the long rods and a set of the short ones aswell.

[bren_1.3 1]

As said I'm down for 2 of the long rods and a set of the short ones aswell.

 

get lost Jrod, i was here first! im down for a full set please!

[Jrod 7]

I think you'll find I was the one who supplied to rods and started the whole thing.

[bren_1.3 1]

ahhh well! i might just let you off the hook. ive been dreaming of these for weeks now....

[trogboy 17]

I'd better get in on the act in case I am forgotten. I have also requested a full set

[bren_1.3 1]

any update on this folks?

[Jrod 7]

They are ready.

[christopher 5 1 Cars]

Did Miles get any extra? I might be interested in a set

[Miles 331 1 Cars]

Depending on how well the first batch sells, I may get another small batch done