Rupertfinch 6 Posted May 9, 2007 (edited) I know it's not strictly necessary to have one, but I bought a flywheel cover off ebay quite a while ago. As I shall have her up on a hydraulic ramp tonight attempting to fit a stretchy CV boot I figured I might spend a few moment replacing the cover as well. I have tried a search through my parts catalogue and the online stuartmcguire one but to no avail! Anyone know the part number for the bolts that attach the flywheel cover? Leaving it late but I'll try local pug and citroen dealer if anyone comes up with the goods! Thanks in advance for any assistance. Edited May 9, 2007 by Rupertfinch Share this post Link to post Share on other sites
Rob_the_Sparky 9 Posted May 9, 2007 I think 4 off M6, about 12-15mm long. They may be M7 but pretty sure they are M6 (10mm head versus 11mm head for an M7). Rob P.S. Go to any fastener place and buy them, you can get stainless for far less than Pug will charge for steel ones and they are fine in non-structural locations like this. Share this post Link to post Share on other sites
j_turnell 137 3 Cars Posted May 9, 2007 Yup 10mm m6 thred. Share this post Link to post Share on other sites
Rupertfinch 6 Posted May 10, 2007 Thank you gents your help was invaluable. Share this post Link to post Share on other sites
