djinuk 2 Posted May 4, 2007 what should i set the tappets to on my 205 1.4 xs. I was told 8 and 10 on a stone cold engine but i cannot remember which was exhaust and which was inlet. Share this post Link to post Share on other sites
trogboy 17 Posted May 4, 2007 if you set them to 8mm and 10mm the valves would never open I usually use 0.2mm inlet and 0.35mm exhaust (from memory) I think someone was talking about 0.20mm for both but I'm not sure that wasn't an XU engine discussion. Share this post Link to post Share on other sites
Jrod 7 Posted May 4, 2007 0.15-0.25 for inlet 0.35-0.45 exhaust from memory. Will confirm later. Share this post Link to post Share on other sites
Enfield 0 Posted May 4, 2007 Done mine the other day at 0.25 inlet and 0.35 exhaust Share this post Link to post Share on other sites
