mi16nut 0 Posted April 21, 2007 I need a picture of the clutch bracket that fits on a BE1 gearbox as mine seems to have gone walkabout following a gearbox rebuild. I don't think it was returned with the box & he's on holiday now! I can't remember what the first bracket looks like or how it fits. I've been searching for ages, but can't find a clear picture. I guess it's off to the scrappy tomorrow. Thanks, Mark Share this post Link to post Share on other sites
Radster 0 Posted April 22, 2007 My engines in the boot of my car so I will be able to get one when I go round to finish it today Share this post Link to post Share on other sites
jochem 0 Posted April 22, 2007 Is it for a 205 8v be1 box or a mi16 be1 box (your signature would indicate the later). They have different clutch cable systems. Share this post Link to post Share on other sites
pug_ham 244 3 Cars Posted April 22, 2007 http://www.stuartmcguire.co.uk/pug/GB/205F/2/21H20A.HTM Item #6 for a 205 be1 gearbox. Not a great picture but gives an idea of what you're looking for. Graham. Share this post Link to post Share on other sites
mi16nut 0 Posted April 22, 2007 Thanks for the replies, especially as my original post was far from clear! I managed to get a bracket from a BE1 309 diesel, although I had to modify & mount it differently to be able to get some clutch adjustment. It's one of those things that you don't really notice, so when it goes missing you don't have a clue! Car's all back together now with a 1.6 final drive & quaife atb diff. Only had a quick "test", but first impressions are good............ Mark. Share this post Link to post Share on other sites
pug_ham 244 3 Cars Posted April 23, 2007 I managed to get a bracket from a BE1 309 diesel, although I had to modify & mount it differently to be able to get some clutch adjustment. You didn't forget the link bar did you Mark? Graham. Share this post Link to post Share on other sites
