Gavtrials 0 Posted April 18, 2007 Hey guys, My 205 has been standing on the drive for far too long now,over a year since its been driven but want it back for this summer,(still starts and runs nice) Anyways i want to get it through an mot soon and above the rear axle attached to the car there are some rubber bump stops, Well in my case there not there now as they have fallen off due to corosion! Will my car fail its mot if these are not in place>? Share this post Link to post Share on other sites
brianthemagical 1 Posted April 18, 2007 (edited) mine didn't snap edit: both mine were missing, took me a while to work out what the rusty bolts and big washeres were doing, until i had too many people in the car. Edited April 18, 2007 by brianthemagical Share this post Link to post Share on other sites
hexhamstu 9 Posted April 18, 2007 snap double snap? Share this post Link to post Share on other sites
jackherer 543 Posted April 18, 2007 Mine failed once because one was missing, but they are much less likely to spot two missing Share this post Link to post Share on other sites
Ruskyruss 0 Posted April 19, 2007 should be fine mate Share this post Link to post Share on other sites
