chownr 0 Posted April 13, 2007 Im thinking of mounting three gauges in the heater control slot on my Phase 1. I want to retain the ability to turn the heater on and off (not worried about direction - will be permanantly on the windscreen, and will be permanantly set at about half temp). is this possible? Can I just provide an auxillary fan switch? Anybody done this already and can give me some advice? Done some searches and found some info about the rhoestat and relay etc but nothing definitive Thanks Rich Share this post Link to post Share on other sites
Guest harry snotter Posted April 13, 2007 yeah thinkig about that myself , looks real nice Share this post Link to post Share on other sites
fencer 0 Posted May 2, 2007 don't know about p1 but I can bypass my p1.5 by bridging the two yellow thick wires. Share this post Link to post Share on other sites
number2301 1 1 Cars Posted May 6, 2007 Yes it can, on my old phase 2 the blower strength knob didn't work so the previous owner replaced it with a big red on off switch. Don't know how it was done though. Share this post Link to post Share on other sites
pugpete1108 62 1 Cars Posted May 6, 2007 at a guess i would say you just find the two wires that go into the blower panel for the strength and just put a switch in it instead . alll the dial does is control the voltage going to the fan motor. Share this post Link to post Share on other sites
