Alastairh 47 Posted April 11, 2007 As the title says. I've got a Concept 300. But my alarm is doing my rents nut in. Its far too sensative. If my dads Audi starts up next to it in the drive 9 times out of 10 it'll go off. And every now again it has little burts for 3 seconds and stops. The main sensor is mounted beside the gear lever, but any ideas before i ditch it? Alastait Share this post Link to post Share on other sites
feb 47 Posted April 11, 2007 (edited) Under the plastic tray in front of gear lever i believe. Don't place any coins or metallic items on that tray or else the alarm will ring! It was doing my head till i found what it was too! Edited April 11, 2007 by feb Share this post Link to post Share on other sites
Alastairh 47 Posted April 11, 2007 Good point, i think i have a couple of coins there! I'll see what effect that does. Share this post Link to post Share on other sites
sorr 0 Posted April 11, 2007 You should be able to adjust the sensor. From memory, when I had a Concept 300, there should be a small screw on the sensor that you turn to change how sensitive it is. Share this post Link to post Share on other sites
