Livelee 0 Posted April 10, 2007 Hi I'm currently rebuilding my 2.0mi engine with a 1.9mi crank and a stage 2 petert cam. I'm after advice on where is the best place to source all of the rebuild parts that i'll need and how much they should cost. I think this is what I need, but i'd imagine more stuff will crop up as I go along. XU10J4 Main Bearings XU10J4 Rod Bearings Complete gasket set to suit an S16 Engine Camshaft Seals (S16) Piston Rings Set (S16) Clutch kit for a 1.9/2.0 Mi16 Cam Belt 1x Set of non stretch Head bolts (S16) Oil Filter (S16) 1x Inlet Vernier Pulley Standard Windage Tray (S16) Many Thanks Dan Share this post Link to post Share on other sites
jackherer 543 Posted April 10, 2007 speak to Matt @ QEP Share this post Link to post Share on other sites
Miles 331 1 Cars Posted April 10, 2007 For the other parts like the Clutch, Belt (Don;t forget tensioners) goto GSF, Also you want the stretch head bolts, For the Oil Filter a OE Pug one is the only one to use, Cheap too. Watch out for the clutch as the 1.9 and 2.0 ones are different so you need to check this before ordering. I;ve got stack's of W Trays Share this post Link to post Share on other sites
willxs 0 Posted April 10, 2007 Just picked up a clutch from Gsf.. £99. slightly cheaper than what it qoutes online and also £30 cheaper than my local motor factors!!! Share this post Link to post Share on other sites