Distributor Vacuum Advance Pipe?

[Guest silver 1600]

Hi all my car has started to develop an annoying sputter at mid to light throttle and its all the time. Its the same if its hot,warm,cold or just started so i thought new rotor arm,dizzy cap and HT leads should fix it

But i went to fit these this morning and I found that the distributor vacuum pipe has totally perished away and fallen off and is nowhere to be seen at all. I have purchased some new hose now to refit but I have a little problem I know one end goes to the distributor and the other goes to the inlet manifold. But I cant seem to be able find the little outlet pipe for for it to connect to any where on the inlet manifold.

Any help would be great as this is doing my head in now

Edited April 6, 2007 by silver 1600

[t16ryan 1]

Goes on the throttle body little tight but can get to it

[Guest silver 1600]

Is that on the bottom of the throttle body?

[ross009 0]

Is that on the bottom of the throttle body?

 

 

yer pointing down towards the floor under neath where the throttle cable finish's up, i had to find it yesterday!

[Guest silver 1600]

Cool thanks for the info guys I'm going to have a better look again now

[Guest silver 1600]

Fitted new pipe this morning and seems 100% better thanks for the pointers guys