KRISKARRERA 2 1 Cars Posted March 28, 2007 I just renewed my "hinge shafts" on my drivers door. I'd ordered just the one from the main stealer but somehow he ordered a whole packet of them which was handy as I finally managed to undo the lower bolt that had been stuck solid for weeks. Look at the state of this: Very worn and slightly bent! I'm getting better at fiddling with cars these days. Did my front suspension, and rear, and now my hinges. Share this post Link to post Share on other sites
Anthony 1,003 Posted March 28, 2007 Just slightly worn then... Share this post Link to post Share on other sites
KRISKARRERA 2 1 Cars Posted March 28, 2007 Yup, that's 17 years wear! Share this post Link to post Share on other sites
Miles 331 1 Cars Posted March 28, 2007 And no posts about getting stuck, I'm impressed Share this post Link to post Share on other sites
Guest mick925 Posted March 28, 2007 did it remove the play Share this post Link to post Share on other sites
Edp 67 3 Cars Posted March 28, 2007 And no posts about getting stuck, I'm impressed Share this post Link to post Share on other sites
KRISKARRERA 2 1 Cars Posted March 28, 2007 did it remove the playBelieve it or not I've not fully tested for that, I'd rather not try to lift the door in case I bend the new pins. Not likely I know but all the same. However, the door no longer catches on the latch so yes it must have taken away most of the play. Share this post Link to post Share on other sites
Anton green 12 1 Cars Posted March 28, 2007 Glad it is sorted. I believe the are two different types of hinge pin on the 205 -Mine arent like yours unfortunately so I will be going into uncharted territory when I replace mine. -I have been told that the pins aren't what wear on my style of door!?? So I'm expecting a fun afternoon seeing what is going on there Share this post Link to post Share on other sites
