Bam 0 Posted March 25, 2007 hi, ... wich differences do they exists between: turbo technics exh. manifold and the replica of 205parts ? same flow?same/better quality? any experince with the replica? (healthly) cheers Share this post Link to post Share on other sites
28CRAIG 2 Posted March 25, 2007 Have a look HERE and HERE And HERE for 205 parts one as you can see there is extra webbing to stop them cracking witch is a common problem on the tt manifols. Flow should be the same as tt manifold asthe cast was taken from a tt manifold then extra material added were it was needed Share this post Link to post Share on other sites
tom_m 0 Posted March 26, 2007 the later castings of the TT Manifold included the webbing too (excuse the poor pics, they were taken on a very poor camera phone) Share this post Link to post Share on other sites
205turbo 32 2 Cars Posted March 26, 2007 (edited) i beleve vern fitted the new manifold i supply to the 205 he had mapped at emerald. Edited March 26, 2007 by 205turbo Share this post Link to post Share on other sites
tom_m 0 Posted March 26, 2007 (edited) i beleve vern fitted the new manifold i supply to the 205 he had mapped at emerald. mint any plans to do the turbo elbows too? Edited March 26, 2007 by tom_m Share this post Link to post Share on other sites
vern 0 Posted March 26, 2007 Yes I did use one of 205 parts manifolds, I think the results speak for themselves, wether it is down to the manifold I don't know. Share this post Link to post Share on other sites
Bam 0 Posted March 26, 2007 (edited) @vern 230bhp and 234lbft? witch tb do you use? cheers mik Edited March 26, 2007 by Bam Share this post Link to post Share on other sites
205turbo 32 2 Cars Posted March 26, 2007 mint any plans to do the turbo elbows too? i'm now looking into this, will let you know soon as i have more info Share this post Link to post Share on other sites
vern 0 Posted March 26, 2007 Mik I am using a standard gti throttle body and intake plenum. Share this post Link to post Share on other sites