Guest quamen Posted March 23, 2007 Hello, im almost done with my conversion to the 306 gti engine for my 205. The wiring is almost completed but there is a wire i dont know what it is, is has the number as in the topictitle. Does anyone know what its for and where to connect it? Also i dont know where to connect the thick red wire from the ignition called nr 5 (?) "ignition" from the 205. If anyone know this or have a complete wiring for this conversion, please send me an email evil_aet@hotmail.com or write here. sorry if my english isnt that good, im from sweden Here some pic of my car http://www.garaget.org/?car=8398 Share this post Link to post Share on other sites
Guest quamen Posted March 23, 2007 forgot to tell that it is a thick white wire in the 19 pinned connector Share this post Link to post Share on other sites
Guest quamen Posted March 29, 2007 help me out here, have looked at wiring diagrams for the marelli but couldn find that cc1 wire... does anyone have the diagram thats covers the 19 pinned connector on the car side ? not just the engineloom Need to know where to put the switched live from 205 into the 306 loom, have located the wire cc2 grey which is the signal for the relay thats powers lambda, fuel pump, coils , thats where i want to put switched live ... i can se it by the relay but cannot find it in the 19 pinned connector....where does it go ? The cc2 grey is also called 1749 can it be the same wire as the white cc1 1749 in connector? Share this post Link to post Share on other sites
pug_ham 244 3 Cars Posted March 29, 2007 A quick search found this topic which might help. Graham. Share this post Link to post Share on other sites
Guest quamen Posted April 3, 2007 A quick search found this topic which might help. Graham. Thanks, still confused thought Have spent hours searching and studying diagrams, the only one where i found the cc1 wire was this: and of course its the best picture ever taken http://www.free.bol.bg/brxmcho/306/Wiring%...ams_Page_13.jpg Seems to be the ignition, but i wanna be sure Someone has that complete pictur ? I wanna see more!! Share this post Link to post Share on other sites
welshpug 1,657 Posted April 3, 2007 hover your mouse over the picture, then click Share this post Link to post Share on other sites
pug_ham 244 3 Cars Posted April 3, 2007 CC1 runs from the ignition switch to pin 14 on the injection relay in the picture you have linked to above. Graham. Share this post Link to post Share on other sites
pugrallye 0 Posted April 4, 2007 (edited) later pug looms are easy to read: CC designated numbers are switched live. All 80** numbers are aircon All 12** are engine consumers (injector etc.) M's are earths BB is battery live (permanent) 13* are sheilded 12* are 12v when running (from relays etc.) Edited April 4, 2007 by pugrallye Share this post Link to post Share on other sites
pj838 0 Posted April 4, 2007 forgot to tell that it is a thick white wire in the 19 pinned connector Which side of the connector is this, car side or engine loom? Share this post Link to post Share on other sites
Guest quamen Posted April 4, 2007 Which side of the connector is this, car side or engine loom? Its the engine side Thank everybody for the replys!!! Share this post Link to post Share on other sites
