Ignition Base Map Anyone ?

[jonand 0]

Desparately need an ignition base map using TPS v revs (alpha n) if anyone has one. S16 in standard spec but with R1 bike carbs and wasted spark coil pack - used for autograss racing only.

 

I believe that 12* at tick over and 36* from 3000rpm upwards at full load is about right, but not sure of the spread through the partial throttle area.

 

I'm using MSnS Extra v3, but I assume that any make would provide suitable data - albeit that I would have to manually enter into the tuning software.

 

Thanks

 

Jon

 

PS I have searched, and got loads of good info - but not what I'm looking for.

[Sandy 191]

36 degrees at full throttle is probably too much, without checking it in the rollers I wouldn't exceed 28-30 degrees on a 16v.

[jonand 0]

36 degrees at full throttle is probably too much, without checking it in the rollers I wouldn't exceed 28-30 degrees on a 16v.

 

Ok thanks for the warning.

[petert 587]

I was posting some data this morning when my laptop died. However, I've posted it on here before for someone with MSII from memory. I suggest a search.

[jonand 0]

I was posting some data this morning when my laptop died. However, I've posted it on here before for someone with MSII from memory. I suggest a search.

 

Thanks Peter - have searched but will try again.

 

Regards

Jon

[Jakob 1]

My base map ignition timing configurator - mostly for forced induction, but maybe you can find something useful.

 

http://www.powerpage.dk/tuning_ignition-fi...rtsmap_v106.xls

 

 

Choose english as language.

 

/Jakob

[petert 587]

Have a look at this thread:

 

http://forum.205gtidrivers.com/index.php?showtopic=55730

[jonand 0]

Thanks Guys - still looking at numbers. Think I am getting the idea