Rippthrough 98 Posted March 21, 2007 As above really, apparently it will fit the 2.0 iron unit, but would it fit the 1.9 alloy unit too? Share this post Link to post Share on other sites
Sandy 191 Posted March 21, 2007 Just the dowel to make a hole for. Share this post Link to post Share on other sites
Rippthrough 98 Posted March 21, 2007 (edited) Just the dowel to make a hole for. Whereabouts? Don't have any of the engines here to check against, anyone got any measurements? Then I can modify the gasket to fit Edited March 21, 2007 by Rippthrough Share this post Link to post Share on other sites
Miles 331 1 Cars Posted March 21, 2007 Yes it's easy to fit, One piece too Share this post Link to post Share on other sites
Rippthrough 98 Posted March 21, 2007 Yes it's easy to fit, One piece too Cheers Miles - just to clarify, it will fit straight on the 2.0, but needs a hole drilling to fit the 1.9? Share this post Link to post Share on other sites
Rippthrough 98 Posted March 21, 2007 Anyone know the peugeot part number and price for a 1.9 mi16 gasket, I can modify the gti6 one then from it. Share this post Link to post Share on other sites
James_R 3 Posted March 22, 2007 or just use RTV and avoid the gasket all together. Share this post Link to post Share on other sites
Rippthrough 98 Posted March 22, 2007 or just use RTV and avoid the gasket all together. PTFE gasket. Share this post Link to post Share on other sites
Rippthrough 98 Posted March 24, 2007 Anyone got a head/gasket to hand that could give me the locations of the mounting holes at either end? Share this post Link to post Share on other sites
Ren 0 Posted March 24, 2007 The gasket come in 2 parts from Peugeot, part number 0348g4 £2.53 plus vat each. I have a couple of photos if any good to you The dowel hole is the top of the 3 on the bottom left And the dowel hole for this one is obviously the bottom of the 3 on the top right. Hope that is what you are after. Ren. Share this post Link to post Share on other sites
Rippthrough 98 Posted March 24, 2007 The gasket come in 2 parts from Peugeot, part number 0348g4 £2.53 plus vat each. I have a couple of photos if any good to you The dowel hole is the top of the 3 on the bottom left And the dowel hole for this one is obviously the bottom of the 3 on the top right. Hope that is what you are after. Ren. Thanks, so it looks like the dowel is at 90* to the centre of the ports, and 5mm between them edge to edge? Share this post Link to post Share on other sites
Ren 0 Posted March 24, 2007 Two minutes and I'll go measure it for you. Ren. Share this post Link to post Share on other sites
Rippthrough 98 Posted March 24, 2007 Two minutes and I'll go measure it for you. Ren. Superb, thanks Share this post Link to post Share on other sites
Ren 0 Posted March 24, 2007 Right I make it 4mm from the edge of the dowel hole to the edge of the port and 4 mm from the edge of the dowel hole to the edge of the bolt hole. The diameter of the dowel hole is 8mm. Ren. Share this post Link to post Share on other sites
Rippthrough 98 Posted March 24, 2007 (edited) Right I make it 4mm from the edge of the dowel hole to the edge of the port and 4 mm from the edge of the dowel hole to the edge of the bolt hole. The diameter of the dowel hole is 8mm. Ren. Thanks very much, great help! IOU: 1 frosty one Edited March 24, 2007 by Rippthrough Share this post Link to post Share on other sites
