fencer 0 Posted February 26, 2007 I bought the digital clock over ebay to fit in my GE. Once it was in i discovered that the conector is missing! I assume that the GE loom is different from the GTI. Now I found the connector that fits the clock but i dont know the wiring configuration. Any 1 can help? Share this post Link to post Share on other sites
Guest smokinslim Posted February 28, 2007 I scanned the wiring diagramms the other day, can email if you want. Share this post Link to post Share on other sites
fencer 0 Posted March 2, 2007 thanks mate! ill drop u a pm with my emailb Share this post Link to post Share on other sites
fencer 0 Posted March 7, 2007 i looked at the diagram but couldnt understand a thing!! does some one know at least the wiring configuration on the clock side. like, eg: 1= +ve 2= -ve 3= ? 4= ? the above is only an example , as i dont have a clue of any configuration. Share this post Link to post Share on other sites
fencer 0 Posted May 14, 2007 ok so with some fiddling about I got the clock to work. I will describe what I did in case some one need to do the same. The image below shows the plug at the back of the clock The pins are as follows: 1 -> Clock +ve 2 -> Clock -ve 3 -> Light +ve 4 -> Light -ve I connected Pin 1 to the cigarette Lighter +ve wire and pin 2 to the cigarette lighter -ve. Pins 3 and 4 I connected to the ash tray bulb. Since pins 3 and 4 are for the clock bulb it does not matter which one is +ve or -ve. As for pins 1 and 2, if you switch them around the clock simply wont turn on. If I'm not mistaking it won't burn (at least mine didn't) Share this post Link to post Share on other sites
