Couple Of Wiring Questions

[Richie-Van-GTi 71 2 Cars]

Im just remaking my loom from the dash plugs through to engine for the carbs. Ive got a small issue. It would appear while removing my loom several months ago Ive lost the engine side of the brown multiplug. Ive checked and I cant find any wire numbers on the end that remains , need someones help in telling me pin by pin whjich wire is which please. Im doing away with the plug anyway and just hardwiring the lot. I searched but other than finding a list of what should be connected I have no idea which pin is which. They are numbered 1-7 though

 

Also on a side note, theres a large white wire from tach relay that goes to SAD and TPS IIRC, Im guessing its a switched live? If so can I use this to feed my electronic speedo sender? Just need a switched feed that doesnt pulse

[Richie-Van-GTi 71 2 Cars]

this is the list I need to complete, I knew one as I had bypassed it before

 

* Starter solenoid.

* Oil pressure sender.

* Low oil pressure stop switch.

* Alternator field wire.

* Water temp.

* Water temp warning switch.

* Oil temp sender. - pin 3

[jackherer 543]

everything you need is in this thread: http://forum.205gtidrivers.com/index.php?s...c=70790&hl=

[Richie-Van-GTi 71 2 Cars]

thats awesome, wish it had come up on a search. Someone should sticky that diagram

 

can anyone confirm if the other wire is suitable for the speedo sender?

Edited February 22, 2007 by Richie-Van-GTi