Guest Tom Dimma Posted February 22, 2007 does anyone no where this is on a tu3s engine? thanks Share this post Link to post Share on other sites
swordfish210 20 Posted February 22, 2007 take the top cam cover off and you will see a hole in the pully, insert a 10m bolt in to this and turn the engine over untiol the bolt slots in to a hole. The you should see a hole in the engine block just above the engine number plate, insert a 6mm bolt in here and it should slot in to a hole in the flywheel. this will be the engine timed up at Number 1 cylinder at TDC Share this post Link to post Share on other sites
Guest Tom Dimma Posted February 22, 2007 cheers mate Share this post Link to post Share on other sites
djinuk 2 Posted February 22, 2007 (edited) Just following on from this how do you time this engine, ive timed mini engines before where u turn the dizzy cap until correct and via a strobe light. Just trying to learn cheers Edited February 22, 2007 by djinuk Share this post Link to post Share on other sites
swordfish210 20 Posted February 22, 2007 yes i think these engines can be timed with a timing light, but when i do mine i just line the engine up with these holes and then whip the dizzy off to see if it is at number 1 firing. if it is then the engine is timed up correctly Share this post Link to post Share on other sites
