djinuk 2 Posted February 22, 2007 I have a standard 1360 tu engine in my xs, Ive had to fit a new carb onto it as the old one played hell. I have done this and the idel is turned very very low but the throttle wont close fully (open about 1/2mm) causing it to idel at around 2k plus. I have been told i need to pretension the spring on the throttle, anybody else done this, help needed Thank You DJ Share this post Link to post Share on other sites
stu_woac 1 Posted February 27, 2007 have you got a pic of your carb from the top and the drivers side so I can have a look, spring on these are normally fine Share this post Link to post Share on other sites
