Oil Filer/breather When Using Carbs

[M_R_205 5 1 Cars]

iv done a search and come up with nothing definative

 

am i coprrect in thinking when i fit R1 carbs (or any other sort) all you have to do is fit a breather filter thingy to the filler cap? its the genral idea i get when looking at the search results,

also if i replace all the crap rubber filler breather pipes with alloy ones, this shouldnt cause any problems should it?

 

ohh aye its an mi16 ally block

 

cheers

Paul

Edited February 16, 2007 by M_R_205

[Richie-Van-GTi 74 2 Cars]

you need to fit a catch tank with a breather filter. Just sticking a filter on will soon clog up with oil and be useless. Alloy pipes wont do it any harm either, plus they are easier to clean out if needed later on

[M_R_205 5 1 Cars]

you need to fit a catch tank with a breather filter. Just sticking a filter on will soon clog up with oil and be useless. Alloy pipes wont do it any harm either, plus they are easier to clean out if needed later on

 

my mate has a spare catch tank i could use,, how would i conect one up?? would the filler neck not act like a catch tank?