stevec205gti 0 Posted February 12, 2007 Anyone had any problems with fitting GSF heater matrix'/matrixes/matrices I've just tried fitting a new one and the holes are at a different angle than the old one so the pipes don't fit. Anyone else found they've been the sent the wrong one or am I just being a retard???? Share this post Link to post Share on other sites
Alastairh 47 Posted February 12, 2007 I've had a gsf one, for my brothers mi. Was spot on, also was a valeo one. Alastair Share this post Link to post Share on other sites
madspikes 41 1 Cars Posted February 13, 2007 I've had a gsf one, for my brothers mi. Was spot on, also was a valeo one. Alastair Same here, I had no problem fitting a GSF valeo one. Share this post Link to post Share on other sites
matty_gti 20 Posted February 14, 2007 Yup, i had no probs with the GSF one... Share this post Link to post Share on other sites
Rob_the_Sparky 9 Posted February 15, 2007 Maybe a photo will help? Share this post Link to post Share on other sites
Ant 2 Posted February 18, 2007 Issue i had in the past was that some had a "plastic" cover on the far side, which means it sticks out of the hole a little too much,as it wont slide all the way in.. Ive got a couple of spares in my garage. One with the plastic cover, one without. Not sure why there is a difference.. Only thing i can think of is the year ? one was from an 88 GTi , the other from a 92.. Regards Ant Share this post Link to post Share on other sites
