Guest cheesy-peas Posted February 4, 2007 Hello, i was after trying to pick everybodies minds. Ive got a non powersteering mi16 205 and have just bought a set of 38mm Mikuni carbs from a GSXR750. But the problem is im in Germany at work and my car is in the Uk and my mate is going to make me a new manifold for fitting the carbs but i need the measurements for the manifold (engine side). So has anybody out there got the measurements so that we can knock a manifold up asap. Many thanks. Share this post Link to post Share on other sites
taylorspug 7 Posted February 4, 2007 What measurements do you want, the port spacing? Share this post Link to post Share on other sites
Guest cheesy-peas Posted February 5, 2007 What measurements do you want, the port spacing? I need everything to build a new manifold, the port spacing both horizontally and vertically, the width of the head, approx location of studs (as i can do thesewhen i get home to the car),ideally if anyone has a manifold off at the moment if they could measure the engine side of that i would be extremely grateful!!!!!Thanks. Share this post Link to post Share on other sites
welshpug 1,677 Posted February 5, 2007 can he get hold of a gasket? Share this post Link to post Share on other sites
