Guest Tom Dimma Posted January 31, 2007 This may sound stupid but does anyone know how to get the roland garros door pins out as i need to change them for the gti ones as i have gti door cards and the pins won't fit through the hole in the door card. iv had a look at them but it seems like i have to take the whole door motor out is this the only way? Share this post Link to post Share on other sites
Simes 248 2 Cars Posted January 31, 2007 (edited) Unless I've misread your post door pins don't go through the door cards. Quick search Edited January 31, 2007 by Simes Share this post Link to post Share on other sites
Ren 0 Posted January 31, 2007 Unless I've misread your post door pins don't go through the door cards. Quick search I'm guessing he means the pins you use to lock the doors. Unfortunately I'm not sure how to take them off. At a rough guess I would say you need to follow the rod down inside the door and they will clip in to the locking mechanism. Remove them from here and clip the other ones in place. Ren. Share this post Link to post Share on other sites
Alastairh 47 Posted January 31, 2007 To remove the door latch mechanism. Knock the check strap pin out (the one that goes click - and costs £4 from pug before you ask). Remove the door card. Then inside theres 2 * 10/13mm bolts. Then the mechanism will fall out through the door. I could of sworn the base models and Gti stuff was the same. Alastair Share this post Link to post Share on other sites
Guest Tom Dimma Posted February 1, 2007 all it is is the door card i have now is shorter than the gti one as in i have paint above my door card the gti ones i have go up to meet the window. Share this post Link to post Share on other sites
Rik 0 Posted February 1, 2007 You've got a Phase 1 Car, but your trying to fit Phase 2 doorcards! Cant be done AFAIK Rik Share this post Link to post Share on other sites
