Spiky 37 Posted January 28, 2007 are they still availble from peugeot, my expansion tank is quiet yellow, so i'd like a ew one, assuming the new some is clear????? also the low lever sensor?? can you still get these???? Share this post Link to post Share on other sites
cybernck 402 1 Cars Posted January 28, 2007 i've recently got a new round white one (it's not clear when new ) with a new plastic cap too. it came in for about £40 for both, from a Peugeot dealer. not sure about coolant level sensors though. Share this post Link to post Share on other sites
205wrc 16 Posted January 29, 2007 New expansion tanks are available from Autofive @ £25.95 (part no.CP026) The coolant level sensors are also available from them @ £19.95 (part no.CP023) Share this post Link to post Share on other sites
GLPoomobile 958 Posted January 29, 2007 What about square PH2 ones? I heard that you can get clear(ish) versions of them. I prefer the design of them to the Ph1/1.5 round ones but the fact that they are black so you can't see the level inside is a bit of a pain! Share this post Link to post Share on other sites
Robsbc 0 1 Cars Posted March 9, 2007 What about square PH2 ones? I heard that you can get clear(ish) versions of them. I prefer the design of them to the Ph1/1.5 round ones but the fact that they are black so you can't see the level inside is a bit of a pain! PH2 tanks are indeed clear part no. 1303.73 and costs around £20 plus VAT Share this post Link to post Share on other sites
Gentrix 2 1 Cars Posted March 9, 2007 PH2 tanks are indeed clear part no. 1303.73 and costs around £20 plus VAT Is this a Peugeot number or Autofive? andi Share this post Link to post Share on other sites
Edp 67 3 Cars Posted March 9, 2007 (edited) That looks like a pug number Gentrix. 1303 73 01 - RIGHT HAND DRIVE WITH ABS BRAKES Edited March 9, 2007 by Edp Share this post Link to post Share on other sites
Robsbc 0 1 Cars Posted March 9, 2007 1303 73 looks like this found in the diesel section for a ph2 :- Share this post Link to post Share on other sites
Higgy 0 Posted March 10, 2007 i've recently got a new round white one (it's not clear when new ) with a new plastic cap too. The same engineer must have been working at Peugeot quite recently, as my (now sold) 206 GTi also had a milky (when new) expansion tank. Does no one at Peugeot think clear plastic would be best? Share this post Link to post Share on other sites
Gentrix 2 1 Cars Posted March 11, 2007 found a picture of a pretty clear one Share this post Link to post Share on other sites
miamistu 1 Posted March 11, 2007 It's tempting to make a black one with a strip of clear plastic down the side so you can check the level. Share this post Link to post Share on other sites
GLPoomobile 958 Posted March 11, 2007 found a picture of a pretty clear one Any idea what model it's from? Share this post Link to post Share on other sites
Gentrix 2 1 Cars Posted March 11, 2007 Any idea what model it's from? No - sorry - I found it on a polish website (I think it was polish) - and I don´t understand any polski *g* Share this post Link to post Share on other sites
yorkshirekowboy 19 1 Cars Posted March 15, 2007 It's tempting to make a black one with a strip of clear plastic down the side so you can check the level. i have spare black one so might have a go like you said by putting a clear strip down the side, thou finding out how to make it stick and water tight maybe a problem thou Share this post Link to post Share on other sites
GLPoomobile 958 Posted March 15, 2007 It would need to be plastic welded. I you can get a clear section of plastic then just take it to some place that can plastic weld. Share this post Link to post Share on other sites
yorkshirekowboy 19 1 Cars Posted March 15, 2007 It would need to be plastic welded. I you can get a clear section of plastic then just take it to some place that can plastic weld. would it be expensive? what type of plastic would it ahve to be?? persex? flexable stuff? Share this post Link to post Share on other sites
