How Hard To Fit A 10 Point Omb Bolt In Cage?

[Spiky 37]

might have the chance of getting one of these soon,

 

these take much work????

 

 

or would i be better of waiting and buying a Safety devices 6 point bolt in????

[rally ax 0]

might have the chance of getting one of these soon,

 

these take much work????

or would i be better of waiting and buying a Safety devices 6 point bolt in????

 

Well I've fitted 2 OMP cages now ,1 to a 106 and the other to my Ax,,,I would say that they are easy enough to fit. You get all the plates to weld to the floor along with a bag of bolts the bolt it together. The door bars usually come part made which allows you to decide how high and at what angle you'd like them. Cut them to size and weld the end on to it then weld the fixing brackets to the cage and bolt it on and that allows them to be removed just like the rear diagonal(very handy to gain access to under the dash !). The only extra things you'll need is bolts and washers to fix it to the car. I'd advise drilling out the 9mm holes on the fixing feet to 10mm and use 10mm bolts, the Blue book says to use 8mm @8.8 min spec,,,,10mm will be far safer !

I bought a Sparco one for my on-going saxo project but I'm not as impressed with the extra work involved with fitting it !

,,,,I'd say you'll be ok with the OMP one

[bren_1.3 1]

I bought a Sparco one for my on-going saxo project but I'm not as impressed with the extra work involved with fitting it !

,,,,I'd say you'll be ok with the OMP

 

finally! someone else who thinks the sparco ones are cr*p. i ranted about these months ago. you have problems with the plates that are supplied?

[dommorton 0]

I fitted one in a day

 

Had to seriously modify the mounts they supplied tho!

[rally ax 0]

finally! someone else who thinks the sparco ones are cr*p. i ranted about these months ago. you have problems with the plates that are supplied?

 

Hmmm,,yes those plates !?,,,CRAP !,,,I thought they must have been for another car !? either that or they were designed over the phone !?

[Kev-G 1]

I bought a Sparco one for my on-going saxo project but I'm not as impressed with the extra work involved with fitting it !

 

Should have come to me for a good price on an OMP one Gary!!

[bren_1.3 1]

Hmmm,,yes those plates !?,,,CRAP !,,,I thought they must have been for another car !? either that or they were designed over the phone !?

 

probably both. i had to make a new set out of cardboard and get them made up.

[djinuk 2]

let me know how u get on with it m8, im looking at one

[bren_1.3 1]

let me know how u get on with it m8, im looking at one

 

not quite sure who your talking to? me, rallyax or spiky?

[rally ax 0]

Should have come to me for a good price on an OMP one Gary!!

 

Sorry Kev , forgot you could get OMP cages at a good price

[Spiky 37]

Should have come to me for a good price on an OMP one Gary!!

 

 

what sort of price???

 

[Kev-G 1]

what sort of price???

 

 

For a 205 10 Pt. bolt-in, currently £290 fully delivered....Expected price increase of approx. £15 @ the end of February.

 

Let me know via PM if you want a quote for another car.

[changingman 7 1 Cars]

Sorry Kev , forgot you could get OMP cages at a good price

 

 

I have a few omp ones and although they are supposedly made to fit i had to cut an inch out of two of them as they were too tall on the legs behind the seats.

when i contacted omp they said it was impossible but shut up when i offered to send them the bits i cut out!!

 

They were both a nightmare to fit ,but if they were the correct size then i reckon it would have been easier!

 

I also have a sparco one fitted in my Mi and it fits like a glove,no trouble at all!!

 

cheers

Liam

[dommorton 0]

My OMP cage fit well but the floor mounts were terrible! needed lots cutting off to make them fit.