yeti-dj 7 Posted January 22, 2007 (edited) Hello, just away to fit the correct loom to my wee MI16 instead of the 1.9 loom thats in it and was gathering all the needed parts but i seem to have mislaid this part. Its the part on the end of the cam to the left in the attached photo. Couple of questions. 1:- does it come on the rotor arm? 2:- if not any idea where i can one of these and not pay a fortune? 3:- anybody got a spare one they would like to sell its the only bit i need and is a right pain, dam the untidy garage i live in.. cheers people. Edited January 22, 2007 by yeti-dj Share this post Link to post Share on other sites
Edd-XS 0 Posted January 22, 2007 The rotor arm set-up had me confused aswell, there should be a white plastic plate that goes on first, then the rotor arm goes on with a big bolt through the middle holding it in place, then the cap bolts over the arm, through the white plate and into the head... i think! 205Parts should have all u need! Hope the helps Edd Share this post Link to post Share on other sites
Edd-XS 0 Posted January 22, 2007 s*it just tuned the pic so I can see it on my dead monitor and see the bit you mean! Doh! That bolts on then the arm bolts to that, again try 205 Parts tho! Sorry! Edd Share this post Link to post Share on other sites
yeti-dj 7 Posted January 23, 2007 cheers people, will give Dingbro a try first then pug parts. does it come with the rotor arm or on its own though??? Share this post Link to post Share on other sites
M_R_205 5 1 Cars Posted January 23, 2007 (edited) Hello, just away to fit the correct loom to my wee MI16 instead of the 1.9 loom thats in it and was gathering all the needed parts but i seem to have mislaid this part. Its the part on the end of the cam to the left in the attached photo. Couple of questions. 1:- does it come on the rotor arm? 2:- if not any idea where i can one of these and not pay a fortune? 3:- anybody got a spare one they would like to sell its the only bit i need and is a right pain, dam the untidy garage i live in.. cheers people. are you talking about the metal bit that goes on the very end of the cam bolted on with a torx bolt http://i91.photobucket.com/albums/k296/con...gh/IMG_0651.jpg Edited January 23, 2007 by M_R_205 Share this post Link to post Share on other sites
yeti-dj 7 Posted January 23, 2007 hello, yes i need the white plastic spacer that goes on before the dissy cap and the bit on the end of the cam that the rotor arm bolts too. how much would you like for the parts? cheers.... Share this post Link to post Share on other sites
M_R_205 5 1 Cars Posted January 23, 2007 hello, yes i need the white plastic spacer that goes on before the dissy cap and the bit on the end of the cam that the rotor arm bolts too. how much would you like for the parts? cheers.... i just pulled the arm off and it apears that one of the 3 bolts has snaped off into the metal bit you can just have them like i say they are surplus as i have the dizzy adaptor to fit il quickly try get the bit off Share this post Link to post Share on other sites
