MiD 0 Posted January 16, 2007 I have searched all the posts on remote locking and none actually gives me the answer I'm looking for. On my GTi I have the round remote sensor close to the interior light, however I have no key fob or bleep to lock the doors. On ebay at the moment is a remote sensor from a 405 with a remote key. Is the sensor a straight forward plug in affair and can the remote key be taken apart and my existing key or a copy placed in the plastic remote body. My STDT has remote locking but the remote part is a seprate key ring attachment rather than incorporated in the key. Share this post Link to post Share on other sites
Miles 331 1 Cars Posted January 16, 2007 The reciver just plug's in and all the one's I;ve seen have been the same, The thing that quite often happens is water get's into it and corrodes the pin's in the plug so if you can get that too you'll be laughing, Also check the interface by the steering coloum Share this post Link to post Share on other sites
yorkshirekowboy 19 1 Cars Posted January 17, 2007 i got a full unit from a 405 diesel with the blip keyfob and the sensor unit plugged it straight in, and hey presto it works class, though i hear if u have unit already in the car, another blip can be programmed thou never tried it with the infra red type one's found on eth 405/309/306/205, done a late two buttened 306 radio one, and that worked with another blip from another 306!!! Share this post Link to post Share on other sites
Ryan 99 Posted January 17, 2007 The infrared fobs for the 205 can't be reprogrammed. They are permanantly matched to the receiver, so you either need to find a matched pair, or give peugeot the code number printed on the receiver and £70+ for a new fob. Share this post Link to post Share on other sites
