rogerrally 0 Posted January 9, 2007 My central fluid light has come up on the dash waning center panel, but I seem to be ok for brake and water fluid levels, any ideas? Share this post Link to post Share on other sites
easypug 0 Posted January 9, 2007 (edited) If its the one with 3 wavey lines then it is indeed the coolant level. Assuming you have the right amount in the headertank then it will just be the sensor that has gone. The brake fluid low level light is the same handbrake light Edited January 9, 2007 by easypug Share this post Link to post Share on other sites
tom_m 0 Posted January 9, 2007 my fluid level light just means i am accelerating. and unplugging the sensor makes no difference! on mine i'm pretty sure its interferance from the HT leads. Share this post Link to post Share on other sites
nick 3 Posted January 9, 2007 The clear header tanks don't seem to do it, only the black ones. I've heard that it's interference as well. Nick Share this post Link to post Share on other sites
pug-girl 0 Posted January 9, 2007 Mine flashes under hard accelleration, but all fluids are fine so I've always just presumed it was the quality french wiring to blame! Share this post Link to post Share on other sites
tom_m 0 Posted January 9, 2007 The clear header tanks don't seem to do it, only the black ones. I've heard that it's interference as well. Nick yup phase two black tank and sensor. phase ones have a different sensor as well as a different tank. Share this post Link to post Share on other sites
