benlilly 0 Posted January 7, 2007 Hi, My car got nicked and then recovered just before chrismas. I'm trying to piece the interior back together where they have tried to hotwire the car. The steeering lock has been broken and the lock mounting points damaged. Does anyone have a photo of how the lock is mounted so I can try and repair it. Thanks, Ben Share this post Link to post Share on other sites
welshpug 1,657 Posted January 7, 2007 You wont be able to repair it, its a part of the ignition lock and needs to be replaced as an unit, If you're lucky you will be able to just unplug the remains of the wiring and plug the new switch in. (I speak from experience ) Share this post Link to post Share on other sites
benlilly 0 Posted January 7, 2007 I have a complete new steering/ignition lock, just no way to mount it as the two brackets that are fixed to the steering column have been ripped off. The two connectors that go to the ignition are luckily still in place. Share this post Link to post Share on other sites
benlilly 0 Posted January 7, 2007 Ok, no need for photos, it's scrap. Anyone have a spare steering column upper section. Wheel to splined lower section? Share this post Link to post Share on other sites
hengti 2 Posted January 7, 2007 i think i've got a couple of spare upper columns - you're welcome to one for nowt if you're willing to collect i'm in Chipping Sodbury if that's not too far - ? Share this post Link to post Share on other sites
benlilly 0 Posted January 8, 2007 i think i've got a couple of spare upper columns - you're welcome to one for nowt if you're willing to collect i'm in Chipping Sodbury if that's not too far - ? Ace! Thanks very much. I'll PM you to organise a time to come down. I'm in Stroud, not too far. Ben Share this post Link to post Share on other sites
