clifton 0 Posted January 4, 2007 hi, right i was in the garage tonight fitting my spax suspension, when i was tighten the top bolts 2 of them snapped! What do i do? do i take the top part of my standard suspension and put it onto the spax or do what? i have no idea! cheers for any adivce Share this post Link to post Share on other sites
welshpug 1,666 Posted January 4, 2007 chop them off then drill the remains out, stick an M8 nut and bolt there, prefferably a Nyloc nut. Share this post Link to post Share on other sites
clifton 0 Posted January 4, 2007 oh thats not to bad then? where can i get some m8 bolts from as i have non in my garage! Share this post Link to post Share on other sites
Rippthrough 98 Posted January 5, 2007 oh thats not to bad then? where can i get some m8 bolts from as i have non in my garage! Any local DIY/Motorist store should be able to get you a couple, failing that, this place does stainless bolts in small quantities and cheap delivery - they are slightly lower strength than the stock bolts are, but not enough to make any difference! http://www.stagonset.co.uk/fasteners Share this post Link to post Share on other sites
ashley peddle 3 Posted January 5, 2007 or new tops are cheap enough... Share this post Link to post Share on other sites
Simon B 3 Posted January 5, 2007 How much and where from Ashley? Share this post Link to post Share on other sites
