vern 0 Posted January 2, 2007 What bolts have people used with this type of wheel it looks like it uses a taper seat but I am not sure, as it looks like it could also use the standard flat washer type as it has a recess for washer. Also what length are the bolts?. Any info would be greatly appreciated so I can buy the bolts. Share this post Link to post Share on other sites
welshpug 1,657 Posted January 2, 2007 I'd imagine seeing as Speedline produce most, if not all, PSA alloy wheels that they'd use the same bolts. can you take a picture of the hole? Share this post Link to post Share on other sites
Gentrix 2 1 Cars Posted January 2, 2007 just looked at the PTS Papers I have here, they say: kone tapered bolts (hope it´s the right translation), with 31mm thread length and 90 Nm torque for tightening. Share this post Link to post Share on other sites
welshpug 1,657 Posted January 2, 2007 http://www.boutiquepeugeotsport.com/Catalo...spx?nom=205_309 pop "jante" into the search box on that page, though it isnt clear what kind of bolts they are, though they do show the same bolt for the Cyclones which use flat bolts? Share this post Link to post Share on other sites
shine 0 Posted January 2, 2007 What bolts have people used with this type of wheel it looks like it uses a taper seat but I am not sure, as it looks like it could also use the standard flat washer type as it has a recess for washer.Also what length are the bolts?. Any info would be greatly appreciated so I can buy the bolts. You can use 12mmx1,25, 28 to 35mm thread lenght, 60 degr cone as used by most cars alu wheels Share this post Link to post Share on other sites
cybernck 402 1 Cars Posted January 3, 2007 to me it looks like you can use either a flat or a cone bolt sorry for the crap pic, had to adjust the levels to make the hole more visible. Share this post Link to post Share on other sites
vern 0 Posted January 3, 2007 Thanks for all the replies. Cybernck thats exactly what I thought, could use either. I had searched the boutique site but found nothing useful. Shine and Gentrix just what I wanted many thanks I can get these ordered now. Share this post Link to post Share on other sites
JERAM 0 Posted January 3, 2007 you can use either type on the one's i have Share this post Link to post Share on other sites
Henry Yorke 269 3 Cars Posted January 3, 2007 There are group A ones that are meant to come with the wheels. Speak to carl cambers as he is in Suffolk (GKZ 206 on here or suffolk@psooc.com) as he bought a new set of these wheels but had to find his own nuts Share this post Link to post Share on other sites
vern 0 Posted January 3, 2007 Jeram do you wheels look the same as the ones in the picture Cybernck posted?. Share this post Link to post Share on other sites
Carl Chambers 7 2 Cars Posted January 3, 2007 Jeram do you wheels look the same as the ones in the picture Cybernck posted?. NOOOOOOOOOOOO!!! Cant believe your in Suffolk and have the same wheels as me! . . By the way I used the standard 1.9 wheel bolts and they were fine. What colour 205 you got? Will keep an eye out for it. then let the tyres down 1 Share this post Link to post Share on other sites
vern 0 Posted January 4, 2007 I have a graphite grey cti with a TT conversion nearing completion, unless you live in the deepest darkest part of Suffolk (Lowestoft) you will not see me, as I do not get out much . Share this post Link to post Share on other sites
Carl Chambers 7 2 Cars Posted January 4, 2007 I live near Diss/Harleston on the Norfolk/Suffolk boarder which is about 35 miles from Lowestoft. Let me know when its done and maybe we could meet up or something? Share this post Link to post Share on other sites
vern 0 Posted January 4, 2007 Will do will let you know when complete. Share this post Link to post Share on other sites
JERAM 0 Posted January 4, 2007 Jeram do you wheels look the same as the ones in the picture Cybernck posted?. With 1.6 GTI wheel bolts. Share this post Link to post Share on other sites
