Bias Pedal Box Dimensions And Mc Recomendations

[inferno 1]

I would like to know how far the cylinders are from the bulkhead on a bias pedel box. im assuming its variable depending on MC's used , so assuming im useing a 1.9gti brake setup. alternatively if u have a pedal box fitted, id like to know the furthest point from the bulkhead, and position of cylinders in relation to the 4 servo mount holes! a photo in situ with some dimensions drawn on would be ideal! thanx in advance.

[bren_1.3 1]

at a rough guess, using an original pedal box thats been modified, the cylinders sit maybe 2 inch away from the bulkhead. its not dependable on master cylinder size either AFAIK. size is internal not external so to speak. youll have more than enough room down there.

[inferno 1]

so you saying the MC's protrude only a few inches into the engine pay?! so not even as far out as the front of the servo?

[Rob Thomson 6]

so you saying the MC's protrude only a few inches into the engine pay?! so not even as far out as the front of the servo?

Nah, they stick out a couple of inches beyond the front of the servo.

 

This is the only pic I've found of mine, thought I had more...

 

http://img119.imageshack.us/img119/655/enginebayqt9.jpg

[Chris H 10]

I have a MW Motorsport pedal box and it fits with plenty of clearnace around an MI16 engine

 

Highly recommended if your planning on buying one...much cheaper if you buy direct from him rather than some "peugeot experts"

http://www.mwmotorsport.co.uk/