r.u.sure 0 Posted December 26, 2006 Hi Hope everyone had a good christmas. I know I'm probably answering a bit of this myself. I'm just trying to fit new rear disks and pads on my 1.9 and have noticed that the rubber that covers the piston has a hole in it (nothing ever goes right ) Without trying to appear dense I assume that this will now need changing, would this be something I can take on myself or will it need to be a garage job. Thanks in advance Dave Share this post Link to post Share on other sites
welshpug 1,662 Posted December 26, 2006 easy peasy job, seeing as youre competent eough to be able to change the pads yourself a good guide on stripping them down is in a 309 workshop manual (oddly this section was missed out in the 205 manual??!) the caliper is used on many a PSA and renault product to name a few so getting spares wont be a problem at all. Share this post Link to post Share on other sites
r.u.sure 0 Posted December 26, 2006 Many thanks for the info. Will get one ordered up and have a bash at it. Dave Share this post Link to post Share on other sites
