migti 0 Posted December 10, 2006 Hi all i have kms ecu and lambda on my 106 gti it runs verry poor form cold, doesnt idle ect Any hints or tips? Cheers Share this post Link to post Share on other sites
Sandy 191 Posted December 10, 2006 Good mapping. The KMS base map supplied on the 106GTi I mapped was terrible on cold start. Share this post Link to post Share on other sites
smckeown 1 Posted December 10, 2006 (edited) yeah my base map was also terrible, it actually wouldnt sart Edited December 10, 2006 by smckeown Share this post Link to post Share on other sites
migti 0 Posted December 10, 2006 cheers, i got the car with kms already fitted and was not given the software, cables ect? what do i need to get in to fettle with the map?? Cheers all Share this post Link to post Share on other sites
smckeown 1 Posted December 10, 2006 you can download the latest software and manual from the KMS site HERE You'll need a serial cable to go from the ECU to your laptop. You may need a serial to usb converter if your laptop doesnt have a serial connection Share this post Link to post Share on other sites
Mattsav 1 Posted December 10, 2006 The later firmware revisions allow the lambda to be turned on at -20deg and then have options as to how lean the engine will run at different temps (up to 60deg). This should make cold start mapping a lot easier. Share this post Link to post Share on other sites
