Livelee 0 Posted November 29, 2006 I've just collected my xu10 sump and it has the temp sender in place. The sender from my xu9 has a single wire attached to it. The new sender has a plug style connector with 2 terminals. Can I just attach my wire to 1 / both of them and will it work? I'm using an aftermarket gauge. Many Thanks Dan Share this post Link to post Share on other sites
jackherer 543 Posted November 30, 2006 yes, just connect a single wire to one of the pins and it will behave like an XU9 sender. Share this post Link to post Share on other sites
B1ack_Mi16 67 Posted November 30, 2006 yes, just connect a single wire to one of the pins and it will behave like an XU9 sender. It kinda works that way on mine 2.3 16v engine. But pressure reads on the low side, so I guess the senders aren't operating with the same resistance range. Share this post Link to post Share on other sites
Livelee 0 Posted November 30, 2006 yes, just connect a single wire to one of the pins and it will behave like an XU9 sender. Perfect, thankyou. Share this post Link to post Share on other sites
pug_ham 244 3 Cars Posted December 1, 2006 You could swap the sender for the XU9 one of the right thread as they were made in two thread sizes & the later ones (14mm) are the same size as the XU10's afaik. Graham. Share this post Link to post Share on other sites
mos 1 Posted December 1, 2006 i need to buy one of these for my s16 engine as it was missing what age/make/ model had the earlier/later ones on as the 8v one i have out of an 1991 1.9 gti appears to be a 14mm thread and this seems to be too big for the s16 sump plus des anyone know of a place other than pug that sell these thanks mark You could swap the sender for the XU9 one of the right thread as they were made in two thread sizes & the later ones (14mm) are the same size as the XU10's afaik. Graham. Share this post Link to post Share on other sites
SweetBadger 94 Posted December 1, 2006 i need to buy one of these for my s16 engine as it was missingwhat age/make/ model had the earlier/later ones on as the 8v one i have out of an 1991 1.9 gti appears to be a 14mm thread and this seems to be too big for the s16 sump plus des anyone know of a place other than pug that sell these thanks mark It'll probably be a 16mm earlier one. I think the new 14mm ones were only found on the late gtis - after 93. I phoned up peugeot to get a price on a later type 14mm one and its about 15 quid inc vat (part number 0242 81 i think but check before ordering). I also asked out of interest how much the GTI6 one is and he came back with a price of £70 !!! bargin... Share this post Link to post Share on other sites
pug_ham 244 3 Cars Posted December 1, 2006 what age/make/ model had the earlier/later ones on as the 8v one i have out of an 1991 1.9 gti appears to be a 14mm thread and this seems to be too big for the s16 sump 1991 will normally have a 16mm thread sender unit, according to the parts cd the 14mm senders were fitted after 09/1993. (item #15). Part number is 0242 81. Graham. Share this post Link to post Share on other sites
mos 1 Posted December 1, 2006 thanks guys, at £15 i will get one from peugeot may bob in tomorrow or monday at £70!!!well i wont be buying a new genuine one! 1991 will normally have a 16mm thread sender unit, according to the parts cd the 14mm senders were fitted after 09/1993. (item #15). Part number is 0242 81. Graham. Share this post Link to post Share on other sites
Livelee 0 Posted February 19, 2007 Sorry to bump my old thread but my sender and or existing 3rd party gauge has given up. I'm just going to buy a new gauge and sender. Is the hole in the XU10 GTi-6 sump 14mm? Cheers Dan Share this post Link to post Share on other sites
