PUGugly 0 Posted November 4, 2006 Need the above ^ any one know where can get one, tryed Rally Design and no luck, local motor factors just stared at me, Help!! Share this post Link to post Share on other sites
welshpug 1,676 Posted November 4, 2006 err? why? try using one with less ports? Share this post Link to post Share on other sites
sonofsam 5 Posted November 4, 2006 I guess you could blank it off with a brake caliper bleed nipple. Share this post Link to post Share on other sites
PUGugly 0 Posted November 4, 2006 welshpug said: err? why? try using one with less ports? Using 406 m/c, find it works better with the 306 gti6 front brake setup. Now got hydraulic handbrake and bias valve plumbed in I need to blank off one of the rear m/c outlets. Bleed nipple may work, would prefer blanking plug still tho Share this post Link to post Share on other sites
welshpug 1,676 Posted November 4, 2006 bleed nipple is a damn good idea actually! you cna bleed the master cylinder much easier then blanking plug is just a bleed nipple without a hole in it. Share this post Link to post Share on other sites
vern 0 Posted November 4, 2006 I think I have one I took off my M/C before converting to disc brakes, You can have it for the price of postage. Or buy a new one from brakeparts.co.uk They are used on CTI etc as they only use 3 ports of a 4 port M/C. Share this post Link to post Share on other sites
Daxed 7 Posted November 5, 2006 Got my blanking plug from GSF Share this post Link to post Share on other sites
