pugbliss 0 Posted October 26, 2006 hi all im at work and my alternator bolt has snapped, im going on my mid morning break soon and need to know what size socket to buy to undo the bolt so i can change the belt. cheers joe Share this post Link to post Share on other sites
sorr 0 Posted October 26, 2006 hi all im at work and my alternator bolt has snapped, im going on my mid morning break soon and need to know what size socket to buy to undo the bolt so i can change the belt. cheers joe 22mm, you will need a spanner not a socket as clearnace is tight. Share this post Link to post Share on other sites
crogthomas 0 Posted October 26, 2006 This wont help much, but the bolt on my car (1989 1.9) was 21mm. A right bugger, since its a spanner very rarely found in sets. Share this post Link to post Share on other sites
steve@cornwall 100 Posted October 26, 2006 This wont help much, but the bolt on my car (1989 1.9) was 21mm.A right bugger, since its a spanner very rarely found in sets. at some point pug started using bolts with the addition of a torx recess in them. I use these, torx bit and a 10mm ratchet spanner makes quick work of an awkward job! Share this post Link to post Share on other sites
