batoutofhell 0 Posted October 17, 2006 Hi guys Got a 406 as a daily drive atm that I've bought couple of weeks ago. The airbag light keeps flashing. (was like it b4 I bought it) Does anybody know how to stop it from flashing as it's getting quite annoying when driving at night. Thanks in advance, Cheers, John Share this post Link to post Share on other sites
sonofsam 5 Posted October 17, 2006 I would imagine you need some sort of reset tools, as in here http://www.airautomotive.com/Specials.htm Or take it to Peugeot, could equal £££ though! Can you not just take the bulb out, or cover it with black tape:) Share this post Link to post Share on other sites
batoutofhell 0 Posted October 17, 2006 I would imagine you need some sort of reset tools, as in here http://www.airautomotive.com/Specials.htmOr take it to Peugeot, could equal £££ though! Can you not just take the bulb out, or cover it with black tape:) Will probably take the bulb out as I aint gonna pay stupid money for something that will take them 30 sec. to sort. Will have a look a that website as well. Thanks Share this post Link to post Share on other sites
sonofsam 5 Posted October 17, 2006 No worries mate- good luck with it:) Air bag most likely the seat belt pre-tensioners under the seats. -Worth a look, Courtesy of Boombang Share this post Link to post Share on other sites
boombang 2 Posted October 17, 2006 ooo famous I am! My 106 was a bitch for this and it turned out to be the connectors on the seat belt pre-tensioner wires. Once its all connected up properly, to reset its a simple as ignition off, ignition on. I'm not sure of the implications of the airbag or the other pre-tensioners not working if the light is on so its worth looking into. Mine was covered with black tape for a year, then a quick pull out and plug back in of the connector under drivers seat sorted it. Worst case it could be that a pre-tensioner or airbag has gone off in the past in an accident. Share this post Link to post Share on other sites
batoutofhell 0 Posted October 17, 2006 ooo famous I am! My 106 was a bitch for this and it turned out to be the connectors on the seat belt pre-tensioner wires. Once its all connected up properly, to reset its a simple as ignition off, ignition on. I'm not sure of the implications of the airbag or the other pre-tensioners not working if the light is on so its worth looking into. Mine was covered with black tape for a year, then a quick pull out and plug back in of the connector under drivers seat sorted it. Worst case it could be that a pre-tensioner or airbag has gone off in the past in an accident. Cheers for that guy's will deffo have a look at that tomorrow. Much appreciated. Share this post Link to post Share on other sites
ORB 227 1 Cars Posted October 17, 2006 Yip my Saxo VTR has issues with the pre-tensioners too Quite often i have to have a fiddle down below (under the seat ) Share this post Link to post Share on other sites
Phil H 16 Posted October 19, 2006 the connector under the seat tends to need the connectors squeezing together every so often. Share this post Link to post Share on other sites
