205 1.4 Bendix Brake Calipers Fronts

[Toddy 7]

What cars peugeot or citroen can you replace a 205 1.4's brakes with, and still fit under the 13" alloys as found on an xs

 

Already looked on brakeworld and noted the models there, just wondering whether a base model 206 calipers may fit?

 

Thanks

[timmsy19 3]

i only thing ive seen is uprated discs and pads from brembo.

[Rippthrough 98]

What cars peugeot or citroen can you replace a 205 1.4's brakes with, and still fit under the 13" alloys as found on an xs

 

Already looked on brakeworld and noted the models there, just wondering whether a base model 206 calipers may fit?

 

Thanks

 

 

I think only upgrade would be to the 2-piece 1.9 gti calipers? 266mm are probably too big. I've got what I think are a pair of 1.9gti calipers sitting around if you want to borrow them to check?

If it's the assymetrical pads type I've got some mintex 1144 pads here with very little use that will fit?

 

 

-Phillip

Edited September 30, 2006 by Rippthrough

[Jrod 7]

I've got 1.6 calipers with 1.9 discs on my Xs

[timmsy19 3]

I think only upgrade would be to the 2-piece 1.9 gti calipers? 266mm are probably too big. I've got what I think are a pair of 1.9gti calipers sitting around if you want to borrow them to check?

If it's the assymetrical pads type I've got some mintex 1144 pads here with very little use that will fit?

-Phillip

 

 

I've got 1.6 calipers with 1.9 discs on my Xs

 

yes but would all this fit under the 13" wheels he has??

[Toddy 7]

Rippthrough, thanks for the offer.

 

Just replaced a partially seized caliper with one from a 106 for a £10, they are better but not great IMO.

[Rippthrough 98]

Rippthrough, thanks for the offer.

 

Just replaced a partially seized caliper with one from a 106 for a £10, they are better but not great IMO.

 

 

Well, send me a PM if you want to borrow them, I'm not doing anything with them.

[Casanova 0]

Will 1.9 GTI discs & calipers fit under the standard XS 13" patterned steels? The tyres are 165/70R13s.

 

§

[edthedrummer 0]

My DTurbo uses solid discs and bendix calipers, are the 1.6gti calipers different? Can i use vented discs on the calipers i have now without any modification?

[Rippthrough 98]

My DTurbo uses solid discs and bendix calipers, are the 1.6gti calipers different? Can i use vented discs on the calipers i have now without any modification?

 

 

Can't use vented discs with the calipers, they're too thin, and if you're going to upgrade you may as well go for a cheap 266mm 307 setup or similar. Although I've some 1144's somewhere for those bendix calipers if you're interested?

[Jrod 7]

If it uses solid discs you will need to swap the calipers.

 

I thought the diesel turbo used vented discs as standard...

[edthedrummer 0]

yes i thought they did too, because i thought nearly all of the running gear such as susp. brakes. etc was the same as the 1600gti model.

 

mine has solid discs, about 12mm thick atm, they are worn to buggery however.

[Rippthrough 98]

yes i thought they did too, because i thought nearly all of the running gear such as susp. brakes. etc was the same as the 1600gti model.

 

mine has solid discs, about 12mm thick atm, they are worn to buggery however.

 

Think the minimum thickness is 9mm, so a fair way to go yet!

[edthedrummer 0]

That was a guess though, they could be well under that judging by my eye. We'll see.

[pug_ham 244 3 Cars]

I thought the diesel turbo used vented discs as standard...

yes i thought they did too, because i thought nearly all of the running gear such as susp. brakes. etc was the same as the 1600gti model.

Only on the STDT or a random lucky one.

 

Of all of the Dturbo 205's I've seen the only one I remember that had GTi front suspension was a J reg five door but I can't remember if it had solid or vented discs but the rear beam's (even on the STDT) are XS spec.

 

Graham.

[edthedrummer 0]

hmmm okay.

 

how can you tell if it has GTI spec suspension? Is there an easy way?

[welshpug 1,657]

2 inner mounting points on the lower arm.

 

non gti only has 1, with the arb bolting to the lower arm.

[edthedrummer 0]

Which part is the lower arm? not the wishbone i take it?

[DaveW 6]

Yes the 'lower arm' is the wishbone on a D turbo. 1.6 calipers fit under 13' steels.

[edthedrummer 0]

well i am fairly certain there are two inner mounting points on the wishbones on my car, two mounting points where it attaches to the subframe?

[DaveW 6]

What year is your 205? yes sounds like it and does it have a rod connecting to the strut?

[edthedrummer 0]

its a 1993 K reg. As for the rod connecting to the strut, possibly. I can't quite remember.

Edited July 21, 2007 by edthedrummer