Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
M@tt

Mi16 Gearbox/1.9fd Yes Or No

Recommended Posts

M@tt

As you'll probably have read i'll be needing a new gearbox as mines been damaged in the crash

 

However rather than a straight mi16 box replacement i'm contemplating getting one with a 1.9 FD as i personally find the box quite short and as a daily driver sitting at 70 at 4k or so makes any morway driving quite painful.

 

I've been in hernys skip with this box setup and found the gearign perfect but his is a turbo.

 

Opinions please

Share this post


Link to post
Share on other sites
Jonmurgie

That combination certainly will make for the longest gear length... 70mph would be 3k rpm looking at the gear ration excel sheets here: http://www.mdracing.co.uk/gearbox.asp

 

Not sure if it may make the whole car feel a bit sluggish though...

Share this post


Link to post
Share on other sites
Ahl

Doesn't sound like a good idea to me either. Also 70 @ 4k sounds more like a 1.6 box.

 

The mi16 sits at about the same revs as the 1.9, just under 3.5k or so at 70.

Share this post


Link to post
Share on other sites
pug_ham

Matt, thats the gearbox I recently sold to Henry for the Turbo Skip.

 

Imo it is to long for an Mi & would take all the fun out of having one. 1st - 3rd are the same as the 1.9 gearbox with 4th & 5h being longer.

 

The longest box I'd get for an Mi is the one I have on my car from a 405 SRi but even then its not a top speed box. (1-3 = 1.6, 4th = 1.9 4th & 5th longer, an Mi box with 1.6 FD).

 

Mi should be showing approx 3250rpm at 70mph.

 

Graham.

Share this post


Link to post
Share on other sites
M@tt

cheers for the replys

 

in that case it sounds like i might have a 1.6 box on mine then, alhoug it could be the speedo out due to a possible combination of mi and 1.9 worm gears in the speedo cable housing ting on the gearbox causng the speedoto misread

Share this post


Link to post
Share on other sites
Dream Weaver

I think mine has a 1.9 box on it, and tbh it makes it far too slow on pickup.

 

Our Beemer is quicker off the mark than the 205, and its a diesel!! :)

 

I'm going for a different box next year.

Share this post


Link to post
Share on other sites
veloce200
I think mine has a 1.9 box on it, and tbh it makes it far too slow on pickup.

 

Our Beemer is quicker off the mark than the 205, and its a diesel!! :)

 

I'm going for a different box next year.

yes but you have a 16v not an 8v. IMO the 8v is better on most roads with the std box and some tracks too.

Share this post


Link to post
Share on other sites
Sign in to follow this  

×