Who Is Running A Carter 4070 Pump?

[c_r_thomson 0]

Hi, the bano's on my dellorto's require an 8mm hose where as the outlets on the carter fuel pump say use a 3/8" hose. This equates to 9.5mm (10mm for talking sake).

 

Just want to know how the other guys running this pump approached this problem.

 

Ta, Craig

[rescue dude 0]

Hi, the bano's on my dellorto's require an 8mm hose where as the outlets on the carter fuel pump say use a 3/8" hose. This equates to 9.5mm (10mm for talking sake).

 

Just want to know how the other guys running this pump approached this problem.

 

Ta, Craig

[/quote

 

I run a Carter pump. Not sure about the fuel line size, i used something that could be clamped up at both end's.

 

Never had a problem as the fuel pressure that isn't high.

 

I run Weber 40's.

[c_r_thomson 0]

Ok, i'll see if 8mm will fit on the pump end then failing that, 10mm with tight clips!

 

Cheers rescue

[mfield 20]

I squeezed the 8mm line over it and like said above just thought that the pressure would be low enough not to split it.