madspikes 41 1 Cars Posted September 4, 2006 I'm currently working on supercharging the old pug, and as a part of this I chopped an inlet in half. I thought I post the pics... Pic1 Inlet2 Current supercharging idea.... Supercharger Pic I'm still working on positioning the charger and cooler. The cooler is off a supercharger jag before anyone asks. Mad. Share this post Link to post Share on other sites
pugrallye 0 Posted September 4, 2006 (edited) ooh err! does that charger clear the starter motor? Edited September 4, 2006 by pugrallye Share this post Link to post Share on other sites
madspikes 41 1 Cars Posted September 4, 2006 Yea, just. The charger is in front of the starter motor. I seem to have a very small startmotor on that engine! Its only an idea at the moment, I still need to see how it would all fit in the engine bay. It prob will all change. Going to bin the arm and air box and move the jack, washers and battery to the boot as I need to fit an extra rad, electric pump and water tank for the air to water cooler. Share this post Link to post Share on other sites
petert 586 Posted September 4, 2006 Going to bin the arm and air box and move the jack, lots of silastic and a few more cable ties, then fire it up! Share this post Link to post Share on other sites
Doof 11 Posted September 4, 2006 keep the pictures coming on this, i'm hoping to do this someday so it'll be interesting to see how you mount it all up Good luck. Share this post Link to post Share on other sites
inferno 1 Posted September 4, 2006 intrestingly huge charger there... keep the pics coming ! Share this post Link to post Share on other sites
