Pics Of Your Lowered 205's............

[PugAddict 0]

Gonna lower my 1.6 at some point, it's still on the standard setup at the mo.

 

Any side-on pics and the mm dropped would be appreciated!!

 

Cheers

 

D

[Jonmurgie 2]

 

Lowered 1 big spline on the rear with standard 205 (1.9) beam... front was lowered to match on Bilstein Coilovers

[steve@cornwall 100]

60mm I think (185/55/15)

 

same drop with 195/45/15

 

30mm (I think)

 

I can't get a normal trolley jack under either. The cti needed lifting manually to get the jacks under on the mot ramp! With the exhaust U-bolt pointing straight down, it hits standard speed bumps!

[DaveW 6]

 

-50mm on Black billstins

[j_turnell 137 3 Cars]

 

-35mm all round.

[Baz 421]

Not sure how much it's lowered to be honest, but it looks good

Too low on the bck though!!

[tom_m 0]

 

as low as it could go on 16s with coilovers

[Ben Allen 8]

Tom chavving it up at a cruise

[t16ryan 1]

Too low on the bck though!!

 

Too low on the back is the least of your worrys your missin two wheel nuts on that wheel , haha

[christopher 5 1 Cars]

Don't you scrape the arches with people in the back when it lowered? (standard shocks)

 

Cos I do:-(

 

 

14" lowered about 30/35mm 1,9 beam

 

Edited September 1, 2006 by christopher

[tom_m 0]

Tom chavving it up at a cruise

 

cruise ha, thats southend mate!!!

[Baz 421]

Too low on the bck though!!

Too low on the back is the least of your worrys your missin two wheel nuts on that wheel , haha

 

Oh crap yeah, thanks for pointing that out, no wonder my wheels keep falling off!!

[Dave87 0]

not level ground but 60mm front and matched on the back.

pic

 

Sorry for the size

 

Dave

 

(edit: pic way too large, see forum guidelines)

Edited September 3, 2006 by jackherer