mrblonde 0 Posted August 16, 2006 hi ya.my bonnet of my pug is setting more to one side.ie one side touches the headlight.i have tired to adjust the bonnet catch.but dont seem to be working.anyone had this problem or any ideas please?. Share this post Link to post Share on other sites
nick 3 Posted August 16, 2006 (edited) I just opened mine up and pushed it over until it was central, it doesn't take much force though so be careful. Or undo the bolts on the hinges slightly and square it up like that. Nick Edited August 16, 2006 by nick Share this post Link to post Share on other sites
steve@cornwall 100 Posted August 16, 2006 (edited) hi ya.my bonnet of my pug is setting more to one side.ie one side touches the headlight.i have tired to adjust the bonnet catch.but dont seem to be working.anyone had this problem or any ideas please?. Do you mean it's sitting lower on one side with the shut lines by the wings equal, or shut lines un-equal and bonnet generally "p*ssed" ? For one corner lower there should be two rubber grommetts, one either side to space the bonnet off the slam panel- these screw in/out for up/down adjustment and seem to be often missing. If its fitted out of line- as above post by Nick Edited August 16, 2006 by steve@cornwall Share this post Link to post Share on other sites
mrblonde 0 Posted August 16, 2006 yeah its got the rubbers,i will try adjusting them tonight.i had a recon engine go in a few months ago,so they may of took the bonnet off to get the engine in.if you look at the car from the front with the bonnet closed.it seats at an angle. Share this post Link to post Share on other sites
mrblonde 0 Posted August 17, 2006 hey,yep tired that last night and worked,thanks lads. Share this post Link to post Share on other sites
