Rippthrough 98 Posted August 8, 2006 anyone know the dimension of the flange on 1.3 rally intake? Where the throttle body mounts? And the bore of the hole would be handy too if anyone has it. Share this post Link to post Share on other sites
rally ax 0 Posted August 8, 2006 Hmmm,why ? ,,, what you up to ? anyone know the dimension of the flange on 1.3 rally intake? Where the throttle body mounts?And the bore of the hole would be handy too if anyone has it. Share this post Link to post Share on other sites
Rippthrough 98 Posted August 8, 2006 Hmmm,why ? ,,, what you up to ? Guess Trying to see if I can mount the monopoint body on there, then when I get the megasquirt on I can switch to four normal injectors for low loads/rpm + switch in the monopoint at high engine speeds for better atomisation. Share this post Link to post Share on other sites
christopher 5 1 Cars Posted August 8, 2006 anyone know the dimension of the flange on 1.3 rally intake? Where the throttle body mounts?And the bore of the hole would be handy too if anyone has it. Not with you? The 1,3 Rallye uses twin 40's. Or am I missing something? Share this post Link to post Share on other sites
Rippthrough 98 Posted August 8, 2006 Not with you? The 1,3 Rallye uses twin 40's. Or am I missing something? I mean the 106 this one: http://i5.ebayimg.com/02/i/07/e6/49/ag_2.JPG Share this post Link to post Share on other sites
pugrallye 0 Posted August 8, 2006 (edited) if you have an s16 or late mi16 they share the same throttle body, they have a triangular flange and intake hole is about 55mm across, and they arent exactly hard to polish up, not 200 odd quids worth anyway Edited August 8, 2006 by pugrallye Share this post Link to post Share on other sites
Rippthrough 98 Posted August 8, 2006 (edited) if you have an s16 or late mi16 they share the same throttle body, they have a triangular flange and intake hole is about 55mm across, and they arent exactly hard to polish up, not 200 odd quids worth anyway I aint buying that one at that price, was just showing the pic for an example! Just after the dimensions of the flag to see if it can be redrilled to fit the other tb. -Phillip Edited August 8, 2006 by Rippthrough Share this post Link to post Share on other sites
pugrallye 0 Posted August 8, 2006 okay triangle... 9cm base and two sides approx 12cm each with 55mm hole in centre Share this post Link to post Share on other sites
Rippthrough 98 Posted August 8, 2006 okay triangle... 9cm base and two sides approx 12cm each with 55mm hole in centre Thanks. Share this post Link to post Share on other sites
