Jump to content
  • Welcome to 205GTIDrivers.com!

    Hello dear visitor! Feel free to browse but we invite you to register completely free of charge in order to enjoy the full functionality of the website.

Sign in to follow this  
pugpete1108

What Engine Is This?

Recommended Posts

pugpete1108

luckily i got a photo before i went to pick up this engine

engine.jpg

bloody scrap yards , havent got a clue, just out of interest but what engine is it

Share this post


Link to post
Share on other sites
Guest cknotty

What Citroen is it in? Definitely looks like an XU of sorts to me. Most likely an XU10, but could be an XU9 from an early ZX possibly?

Share this post


Link to post
Share on other sites
Banjo

XU10J2 2lt 8v

Edited by Banjo

Share this post


Link to post
Share on other sites
pugpete1108

they told me it was a 2ltr 16v froma xantia , one weird looking engine tho!

Share this post


Link to post
Share on other sites
boeseturbo
they told me it was a 2ltr 16v froma xantia , one weird looking engine tho!

 

 

I´m sure, that is not a 16V! look at the spark-plugs... look like normally XU 8V

Share this post


Link to post
Share on other sites
pug309twin40s

banjo already got it.

 

2lt 8v xu10J2, 125bhp.

Share this post


Link to post
Share on other sites
Guest andy309goodwood

same engine as in the 306 xsi 8v the reason it looks strange is the air box that is mounted on the cam cover apart from that its a std xu10 8v

 

 

 

 

 

 

 

... i think lol

Share this post


Link to post
Share on other sites
inferno

good engines those... but if its in a xantia it could be a 1.8 as most 2litre xantias were 16v.

 

how much are they asking? i sold one in two halves for around 100 quid, also the management should fit a gti nicely.

 

add a gti cam to that engine and remove the s*it air routes and IIRC youll see around 140 bhp with plenty of tourque...

Share this post


Link to post
Share on other sites
Banjo

I've got one in me red pug, with the gti cam and a bit of head work it goes well. Baffled sump with trap door and windage tray too..

Edited by Banjo

Share this post


Link to post
Share on other sites
inferno

that is a xantia btw on looking at the pic again, its very probably a 1.8. should have a badge on the doors indicating so.

Share this post


Link to post
Share on other sites
pug309twin40s

oops i forgot they did these in 1.8's iswell.

 

 

inferno.

 

they do have the 2lt 8v;s in xantia's iswell.

 

a friend has 1.

Share this post


Link to post
Share on other sites
inferno

i stand corrected... ive only ever seen 2l 16vs and 1.8 8 vs in them ;)

Share this post


Link to post
Share on other sites
jackherer
i stand corrected... ive only ever seen 2l 16vs and 1.8 8 vs in them :lol:

 

I've had xantias and xms with 2.0 8v engines.

Share this post


Link to post
Share on other sites
pugpete1108

they wanted £120 for it but i am looking for 16v power and nothing else , don't think i will ever find a cheap one tho :lol:

i was gonna drive 240 miles round trip to pick it up then got the photo at the last minute , lucky really

Share this post


Link to post
Share on other sites
jackherer
don't think i will ever find a cheap one tho :)

 

You're doing the right thing by looking at old xantias etc, keep trying and you'll find a bargain eventually, trust me. Then, when you've found one you'll probably find loads more :)

Share this post


Link to post
Share on other sites
Richie-Van-GTi

16v head from s16/gti6 or mi will all fit onto the 2.0 8v easy enough. If you cant find a decent 16v lump get a cheap decent 8v and a known good head of here ;)

Share this post


Link to post
Share on other sites
Sign in to follow this  

×