aldo56 0 Posted July 21, 2006 i have just completed an induction shortener, using the acticles section of this website. The problem i have incountered is that my idle and throughout the rev range untill the top end has become rather "stuttery and rough". I tired as oen of the articles to clean out the brass screw in the throttle body however nothing changed!!! Any ideas?? any help would be much appreciated as my cars cuitting out when not on the throttle Share this post Link to post Share on other sites
pug_ham 244 3 Cars Posted July 22, 2006 Check the plugs for the AFM & throttle switch are secure & none of the pins are pushed back on the AFM plug. What else did you disturb when fitting it? Graham. Share this post Link to post Share on other sites
aldo56 0 Posted July 26, 2006 found out the problem was the angle the air sencor was at, you need it to be horizonal ie what it was origianly. Works great now tho! Share this post Link to post Share on other sites
