DaveW 6 Posted July 17, 2006 i bet you cant get this from a motor factor or can i bodge a hose thats the right size on? Share this post Link to post Share on other sites
hengti 2 Posted July 17, 2006 (edited) some high st places can get pattern top/bottom hoses best off at pug i'd have thought though edit: you can buy (straight) hose of various diameters, but i wouldn't have thought there'd be any way you could route a hose that short without kinking it Edited July 17, 2006 by hengti 1 Share this post Link to post Share on other sites
inferno 1 Posted July 17, 2006 (edited) ive got a hose on the garage floor just like that! cant think where it came from though... assuming it was an mi or gti as thats all ive broken recently, a lot of vauxhalls have curly pipes like tht though... i remember getting a vx hose before when i did my zx turbo is it the smaller bore one from the metal water pipes at the back or a larger rad hose size, ive got both Edited July 17, 2006 by inferno Share this post Link to post Share on other sites
DaveW 6 Posted July 17, 2006 no 8v hose under the dizzy, oh dear looks like stealer time for me.... Share this post Link to post Share on other sites
Jonmurgie 2 Posted July 17, 2006 It's crazy as that is the one hose that is well know for blowing and yet places like Samco don't do that as part of their 205 kit!! Pug or scrap yard only I'd say... Share this post Link to post Share on other sites
Guest CB-Dave Posted July 17, 2006 I've done that hose before too - I think it was only about 7 quid from the dealers when I replaced it but that was a few years ago now... also irritatingly it doesn't come with the samco kit either you can probably have a silicone one made up if you send it to SFS but i'd not like to guess at the cost Share this post Link to post Share on other sites
inferno 1 Posted July 17, 2006 ooooh yes lol i have 3 of thos;) from the air devise thingy?! would of thought there only a few quid new why not ask pirteks to make one as they supply samco ive been led to believe? Share this post Link to post Share on other sites
DaveW 6 Posted July 17, 2006 It's crazy as that is the one hose that is well know for blowing and yet places like Samco don't do that as part of their 205 kit!! Pug or scrap yard only I'd say... Does it not! has no one asked them why? meh 7quid for a poxy hose i'll ring em in the morning i bet they wont know what i want Share this post Link to post Share on other sites
pug309twin40s 1 Posted July 17, 2006 yep that hose is usually the 1 that splits!! due to crappy tight direction change there is on the hose. get a new 1 from pug. no point finding a 2nd hand 1 as its proberbly close to end of life. Share this post Link to post Share on other sites
DaveW 6 Posted July 17, 2006 ive found this number by chance 135104 cant seem to find it on stu's online pug parts....not even sure its the one Share this post Link to post Share on other sites
Simes 248 2 Cars Posted July 17, 2006 (edited) It costs less than a tenner from pug. I replaced mine a couple of years ago along with the Samco set. Edited July 17, 2006 by Simes Share this post Link to post Share on other sites
Miles 331 1 Cars Posted July 17, 2006 Easy way to get rid of this, The phase 2 just uses a Continious pipe from the stat housing to the heater and does away with the alloy thru block, The ECU temp sensor can be screwed into the housing (After drilling and tapping) and bob's your uncle Share this post Link to post Share on other sites
KRISKARRERA 2 1 Cars Posted July 18, 2006 I'm pretty sure Pug no longer sell this hose. Easy to rig something up with a bit of copper piping though. Share this post Link to post Share on other sites
Ryan 99 Posted July 18, 2006 I've got a spare you can have for postage if you can't get a new one. Share this post Link to post Share on other sites
miamistu 1 Posted July 18, 2006 ive found this number by chance 135104 cant seem to find it on stu's online pug parts....not even sure its the one If you've got the number and are trying to find the page on the online catalogue remember the parts are in a "xxxx xx" formation so your search should look like this. Share this post Link to post Share on other sites
DaveW 6 Posted July 18, 2006 i got one this morning £5.88 part number 135104 Share this post Link to post Share on other sites
