Guest ashnicholls Posted July 16, 2006 How many Nm should the clutch housing bolts be torqued up to. Because in my Haynes it says to torque them up to 45Nm, is this right? Because i have just snapped two of the bolts trying to get it up to this? Probably some KwickFit monkey changed the clutch and did over tightened it with an airgun? Cheers Share this post Link to post Share on other sites
Ryan 99 Posted July 16, 2006 Where in the haynes manual are you looking? Mine says 12Nm Share this post Link to post Share on other sites
Guest ashnicholls Posted July 16, 2006 In the front of my Haynes Manual Under Over Head Cam Engine, It says Clutch Housing Bolts 45Nm?????????????????? Mine is a 309 by the way, and that in the 309 manual. cheers Share this post Link to post Share on other sites
Banjo 1 Posted July 16, 2006 I just do em up evenly tight, with a dab of thread lock, never had a problem. Ben Share this post Link to post Share on other sites
Guest ashnicholls Posted July 16, 2006 what torque though, was 45Nm too much, because it says you need 50Nm for the flywheel bolts, so i thought this was maybe abit much just for the housing?????????? Share this post Link to post Share on other sites
Guest rick03054 Posted July 16, 2006 what torque though, was 45Nm too much, because it says you need 50Nm for the flywheel bolts, so i thought this was maybe abit much just for the housing?????????? Where in the haynes manual are you looking? Mine says 12Nm Definitely says 12Nm in the haynes. Share this post Link to post Share on other sites
Guest ashnicholls Posted July 16, 2006 the 309 haynes is wrong then, it defo says 45Nm, so no wonder they snapped, need a new set now then. Share this post Link to post Share on other sites
