Which Distributor Cap And Leads?

[Bassman 1]

I want to change the distributor cap and rotor and the HT leads but I don't know which type to get. GSF show two different models of dizzy cap and rotor, the leads I think I can work out.

 

My car is a limited edition 1.9 Phase 1.5 1990 so I think the HT leads I need are:

 

T92638 (older than '91)

 

The dizzy cap and rotor arm is either:

 

T92152 1.9i XU9JA

T92156 1.9i

 

Couldn't see any distinguishing features from looking at the dizzy early today. The HT leads currently fitted are BOSCH.

 

Any help would be appreciated.

 

Rob

[pug_ham 244 3 Cars]

Your cap will be a screw on type where the earlier ones are clip on & the HT leads ends are different Female on clip on caps & male one screw on caps).

 

Check they are the same when you get them but with GSF any part can be a monopoly sometimes.

 

Graham.

[Bassman 1]

Your cap will be a screw on type where the earlier ones are clip on & the HT leads ends are different Female on clip on caps & male one screw on caps).

 

Check they are the same when you get them but with GSF any part can be a monopoly sometimes.

 

Graham.

 

I tried calling GSF and they seemed to struggle to tell me which I needed other than the Bosch ones were Male and the Ducellier were Female and then the fire alarm went off and the guy had to hang up on me!

 

I decided to go with the Bosch parts on the Neat Autos site and a Dizzy Cap, Rotor Arm and Leads with VAT and Shipping came to less than £35 (over £42 at GSF) so fingers crossed I've got the right ones!