aldo56 0 Posted July 11, 2006 is it possible to convert a non-power steering 1600 (1988) to powersteering?? if so what do i need etc?? Share this post Link to post Share on other sites
sonofsam 5 Posted July 11, 2006 Yes it is, you would need the whole set up from a power steering model. Rack, hoses, pump, plus alternator bracket to hold pump and lower part of the steering column too i suppose as they are different plus thicker bottom pulley for wider belt to run pump. I bet if you searched you would probably find out how to install aswell. Share this post Link to post Share on other sites
feb 47 Posted July 11, 2006 I didn't know the bottom pulley is different? Share this post Link to post Share on other sites
Super Josh 4 Posted July 11, 2006 I didn't know the bottom pulley is different? It isn't Josh Share this post Link to post Share on other sites
sonofsam 5 Posted July 11, 2006 Aha you got me That would be A/C wouldn't it. Share this post Link to post Share on other sites
blue1.9 0 Posted July 11, 2006 There is a very good guide in the articles section of the main website...I followed it when I converted mine. Direct Link: http://www.205gtidrivers.com/articles/s-pas.html Good Luck Alex Share this post Link to post Share on other sites
Super Josh 4 Posted July 11, 2006 Aha you got me That would be A/C wouldn't it. Share this post Link to post Share on other sites
